These mistakes cause almost all complaints, bad results, and fast wear:
Using carbide blades:
Carbide is not suitable for SharpTool 2.0.
Drill speed to high:
Stay around 1200 RPM. Start low and increase only if needed.
Using too much pressure:
Light pressure only. Extra force increases heat, sparks, and wear.
Overheating the blade/head:
Sharpen a maximum of 1 blade per minute and let everything cool down.
Sharpening in a messy or unsafe area:
Wear PPE and work in a clean, well-lit, ventilated space with bystanders away.
If you want, send support one photo of the blade you’re sharpening and we’ll confirm compatibility before you waste time.